On Monday, the U.S. Consumer Product Safety Commission (CPSC), in cooperation with Delta Enterprise Corp. announced a voluntary recall to replace missing safety pegs involving 985,000 drop side cribs.
When the safety pegs in the base of each leg of the crib are missing from the lower track, the crib locks can disengage and detach if lowered below the peg hole, creating a hazardous gap. This gap can lead to the entrapment and suffocation of an infant or toddler.
CPSC staff is aware of a death of an 8-month-old child who became entrapped and suffocated when the drop side of the crib detached in a reassembled crib where the safety pegs were not installed. CPSC is also aware of two entrapments and nine disengagement incidents in cribs where the safety pegs were missing.
U.S. & World
The recall involves all Delta cribs manufactured in Taiwan or Indonesia, with the "Crib Trigger Lock with Safety Peg" drop side hardware design. These model numbers and country of origin can be located on the mattress support board label: 4320, 4340, 4500, 4520, 4530, 4532, 4540, 4542, 4550, 4551, 4580, 4600, 4620, 4624 (production dates 01/06 thru 11/07), 4640, 4660, 4720, 4735, 4742, 4750 (production dates 01/95 thru 12/00), 4760 4770, 4780, 4790, 4820, 4840, 4850, 4860, 4880, 4890, 4892, 4900, 4910, 4920, 4925-2, 4925-6, 4930, 4940, 4943, 4944, 4947, 4948, 4949, 4950, 4958, 4963, 4968, 4969, 4980.
The recalled cribs have date codes ranging from 1995 though December 2005 and one model (4624) was made in 2007. The model numbers are located on the top of the mattress support board.
The cribs, which were made in Taiwan and Indonesia, were sold at major retailers, including Walmart, Kmart and Target.com from January 1995 through September 2007 for about $100. These cribs have also been found to be sold secondhand.
The recall also involves all Delta drop side cribs manufactured prior to 2006 that use "Crib Trigger Lock with Spring Peg" drop side hardware design. The recalled model numbers include: 4340, 4343, 4520, 4600, 4620, 4624, 4625, 4629, 4660, 4665, 4720, 4750, 4751, 4850, 4855, 4857, 4880, 4920, 4925-2B, 4925-6, 4980, and 8605. The model number and manufacture dates are located on top of the mattress support board. The recalled cribs have Delta's name and address on the mattress support boards and Delta's logo on the teether rail.
The cribs, which were made in China, were sold at major retailers nationwide from January 2000 through January 2007 for between $33 and $200.
CPSC and Delta urged parents and caregivers to immediately stop using cribs that are missing a safety peg on any leg of the crib and contact Delta to receive a free, easy-to-install repair kit. The kit will include safety pegs in a bold color and warning labels to be affixed to the mattress board. Consumers with cribs that have all safety pegs installed may continue to use the cribs; however, CPSC recommends that these consumers contact Delta for the repair kit for future assembly purposes. Call Delta toll-free at (1-800-816-5304) anytime after 5 p.m. Monday or log on www.cribrecallcenter.com to order the free replacement kit.
Parents and caregivers are encouraged to find a safe, alternative sleep environment for their child while the repair kit is safely installed on the recalled cribs.
CPSC also reminded parents not to use any crib with missing, broken, or loose parts. Parents should tighten hardware from time to time to keep the crib sturdy. When using a drop side crib parents should check to make sure the drop side or any other moving part operates smoothly as well as check all sides and corners of the crib for disengagement. Any disengagement can create a gap and entrap a child. In addition, parents should not try to repair any side of the crib, especially with tape, wire or rope.